T-Pins, Pin Clamps, Scalpel Blades From Tailspin Aviation
06-26-2010, 08:08 AM
#1
Super Contributor
Thread Starter
Join Date: Aug 2005
Location: Denver, Colorado
Posts: 5,455
T-Pins, Pin Clamps, Scalpel Blades From Tailspin Aviation
Hello To All Builders!
I just received an order from Tailspin Aviation;
http://www.tailspinaviation.com/index.html
And wanted to show a few items. I ordered more pin clamps, T-pins, a scalpel handle and 100 # 11 scalpel blades. The blades were $14.99 for 100 blades, slightly more expensive than regular # 11's, those are about a dime apiece in bulk.
But they seem very sharp, I intend to use them to cut covering material.
The pin clamps are $1.50 for 30 clamps, and the T-pins $3.00 for 100.
Zach Crawford sent the order out quickly and I received it in about 4 days. Good service and everything was as ordered.
Thanks, Zach!
Ron
I just received an order from Tailspin Aviation;
http://www.tailspinaviation.com/index.html
And wanted to show a few items. I ordered more pin clamps, T-pins, a scalpel handle and 100 # 11 scalpel blades. The blades were $14.99 for 100 blades, slightly more expensive than regular # 11's, those are about a dime apiece in bulk.
But they seem very sharp, I intend to use them to cut covering material.
The pin clamps are $1.50 for 30 clamps, and the T-pins $3.00 for 100.
Zach Crawford sent the order out quickly and I received it in about 4 days. Good service and everything was as ordered.
Thanks, Zach!
Ron
