cj2563

I am wondering about this plane for my first 3d and wanted some feed back about what you guys think or any other suggestions. Thanks

JetPlaneFlyer

The Yak looks good and gets some good reviews. I don't think you could go far wrong for the price.

Enrique K.

I love my Hobbyking EPP Yak 55! All 3D I learned I did it on this model. And I still continue enjoying flying it after two years, so much so that I have two of them!

I know there are several successful prop/motor/esc/battery combinations, but here is mine:

1. 11 x 5.5 APC prop
2. Aerodrive SK3 3536 1050 kv motor
3. Hobbyking BlueSeries 40A ESC
4. 1800 mah 3S 25 C batteries from Yellow Jackets

These batteries are not always in stock (I just checked and they are not) but Mr. Breuer is extremely active and is reprenishing his stock constantly.

I will post the links to these articles below.

Hope this helps!

Enrique K.

Here are the links:

2. Aerodrive SK3 3536 1050 kv motor ( http://www.hobbyking.com/hobbyking/s...ner_Motor.html)
3. Hobbyking BlueSeries 40A ESC (http://www.hobbyking.com/hobbyking/s...ontroller.html)
4. 1800 mah 3S 25 C batteries (http://www.yellowjacketsrc.com/store...&product_id=62)

Enrique K.

Here are the links:

2. Aerodrive SK3 3536 1050 kv motor ( http://www.hobbyking.com/hobbyking/s...ner_Motor.html)
3. Hobbyking BlueSeries 40A ESC (http://www.hobbyking.com/hobbyking/s...ontroller.html)
4. 1800 mah 3S 25 C batteries (http://www.yellowjacketsrc.com/store...&product_id=62)

cj2563

Thanks for the replies. Might be a while before i get it though.

Crashalott

I am still waiting for the Michael Wargo Signature Yak 55 3d airplane which is supposed to be sold by HK.
SlowBoat from China
Crash

Crashalott

Got it ordered finaly and it is due to arrive here this afternoon.
Then i can begin the assembly.
Crash

Crashalott

Got the Wargo Yak and have it assembled and ready to fly.
Has anyone else got one yet?
Let us know how it goes.
It looks like a solid plane to me, tough.
Crash

Crashalott

Well i have flown it 5 times now and so far have not had very good luck with any 3d flying. I am mostly trying to fly and land right now,without damage.
So far i have had to repair the motor mount 2 times and the servo's i used did not hold up very long. The cheap servo's don't get it. Now i am waiting on a servo order.
Crash