The Unofficial Central Delaware Parkflyers Association
06-25-2014, 12:42 AM
#9351
Super Contributor
Join Date: Aug 2010
Posts: 1,073
Originally Posted by newjak
I have two helis on the bench right now. I decided not to upgrade the 600. I'm going to use the last belt I have. It has flown so great on the belt system. When this belt wears out I'll upgrade to TT. The 450 pro is in for umbrella gear replacement. Should be ready to fly for the weekend.
What is umbrella gear?
06-25-2014, 12:48 AM
#9352
AMA Park Pilot Partner
Join Date: Feb 2007
Location: Cheswold, DE
Posts: 4,657
06-25-2014, 03:41 PM
#9357
Member
Join Date: Mar 2008
Location: Dover, DE
Posts: 683
Originally Posted by newjak
I will look in my parts bin for the shims. I only have plastic tail blades. I have a set of KBDB's in neon yellow. No carbon fiber.
06-25-2014, 06:45 PM
#9358
AMA Park Pilot Partner
Join Date: Feb 2007
Location: Cheswold, DE
Posts: 4,657
Ohhhh nooooooooo!!! I have an itchy trigger finger....again!
http://www3.towerhobbies.com/cgi-bin...&I=LXZGX7&P=ML
http://www3.towerhobbies.com/cgi-bin...&I=LXZGX7&P=ML
06-26-2014, 04:14 PM
#9359
Super Contributor
Join Date: Aug 2010
Posts: 1,073
06-28-2014, 10:04 PM
#9363
AMA Park Pilot Partner
Join Date: Feb 2007
Location: Cheswold, DE
Posts: 4,657
Originally Posted by pmikeyg
OMP Razor Yak
White with red/black
White with red/black
I'm getting ready for tomorrow's flight session. I am almost finished with the repairs to the Mini Pulse.
06-29-2014, 02:25 AM
#9364
Member
Join Date: Mar 2008
Location: Dover, DE
Posts: 683
Originally Posted by newjak
OK. If it was green/black I would be all over it. Maybe I will check it out anyway later in the week.
I'm getting ready for tomorrow's flight session. I am almost finished with the repairs to the Mini Pulse.
I'm getting ready for tomorrow's flight session. I am almost finished with the repairs to the Mini Pulse.
06-29-2014, 06:31 PM
#9366
-aggressive flyer-
Join Date: Jan 2008
Posts: 2,292
info from the wise, if any is interested in purchasing a DX9 or more advanced radio, maybe Newjak has better luck BUT....
the supplied SD card is RUBBISH! even horizon/spektrum is aware! and continue to sell these decent radio with a junky card installed, and mine came with version 1.01A.
short story I was updated it and shows signs of WTF and hangs on the main screen ... I used a card from my old cellphone and success without bricking it , now the splash screen turns off and beeps correctly, HAPPY! and leaving the fuk thing alone
the supplied SD card is RUBBISH! even horizon/spektrum is aware! and continue to sell these decent radio with a junky card installed, and mine came with version 1.01A.
short story I was updated it and shows signs of WTF and hangs on the main screen ... I used a card from my old cellphone and success without bricking it , now the splash screen turns off and beeps correctly, HAPPY! and leaving the fuk thing alone
06-29-2014, 10:34 PM
#9367
AMA Park Pilot Partner
Join Date: Feb 2007
Location: Cheswold, DE
Posts: 4,657
I didn't use the supplied SD card. I used my old one from the DX8. I thought I could import my model info but it isn't compatible. What version did you upgrade to? The latest version is 1.06
06-30-2014, 12:23 AM
#9368
-aggressive flyer-
Join Date: Jan 2008
Posts: 2,292
Originally Posted by newjak
I didn't use the supplied SD card. I used my old one from the DX8. I thought I could import my model info but it isn't compatible. What version did you upgrade to? The latest version is 1.06
Spektrum™ DX9 AirWare™ Change Log
2014-May-21
Version 1.06
Changes since 2014-April-18
New Features & Improvements
• Added AS3X Gain monitor functions for use with AR636, AR6335, and similar
AS3X receivers. When you enable telemetry option AS3X, you are able to see
gain status in real time, and adjust it with a trimmer. Note that this function
performs the following re-configurations in your radio:
o The F-Mode switch has its outputs set to the proper values for AS3X
operation. If you are using it for other purposes, you will need to
reconfigure those features to allow AS3X to use them.
o Mix 16 (DX10t and higher) is used to control AS3X gain.
o The selected channel is reconfigured for proper control. If you change the
channel, you will need to manually re-assign the old channel to its desired
purpose.
o Enables a screen “AS3X Gains” on the Function List to configure
parameters.
o Enables the AS3X telemetry gain monitor on the telemetry screens.
o If you are using a DX6, you can tweak the gains using the roller while on
the AS3X Gains configuration screen. If you are using a higher radio, you
can adjust at any time using the desired trimmer.
Corrections
• In Heli mode, Governor Trim function now works properly.
• Fixed Servo Travel problem for second Elevator in a 4-Servo swash heli.
• Improved translations in multiple languages
• When using a trimmer in 2- or 3-position mode, trimmers were acting as Flight
Mode trims. They are now operating in Common Mode
• Trim decrement tone was being controlled by the Switch Sounds setting
• Governor Trim on Heli Trim Setup screen is now properly adjustable
• If a radio is configured as a Wireless Trainer Master, if it were used as a wired
slave it would not function. This has been corrected.
Audio System Changes
• No change
06-30-2014, 03:20 AM
#9370
Member
Join Date: Nov 2012
Location: Dover DE
Posts: 547
Nice flying with you guys today. Here is the link to the video of your T-Rex 550 Barry
http://youtu.be/fPQBHVVmK38
Here are two more links to the Mikado Logo and E-Flite Eratix......
http://youtu.be/CoofU5Hljoo
http://youtu.be/d2RkKFyLyw8
http://youtu.be/fPQBHVVmK38Here are two more links to the Mikado Logo and E-Flite Eratix......
http://youtu.be/CoofU5Hljoo
http://youtu.be/d2RkKFyLyw8
Last edited by beyondthebluerc; 06-30-2014 at 04:19 AM.
06-30-2014, 07:19 AM
#9373
Member
Join Date: Nov 2012
Location: Dover DE
Posts: 547
Originally Posted by newjak
Thanks for posting the videos. I'm glad I waited to bring out the helis this year. I'm having more fun than ever!
Glad you are having fun with your helis and looking forward to flying with you guys again
