my first 3D plane from HobbyKing
10-07-2011, 12:10 PM
#1
New Member
Thread Starter
Join Date: Apr 2011
Posts: 17
my first 3D plane from HobbyKing
hello, im want a 3d airplane so look what im want :
plane:
http://www.hobbyking.com/hobbyking/s...%5FARF%5F.html
motor:
http://www.hobbyking.com/hobbyking/s...idProduct=6410
prop:
http://www.hobbyking.com/hobbyking/s...idProduct=7167
lipoX2:
http://www.hobbyking.com/hobbyking/s...S1P%5F20C.html
servosX4:
http://www.hobbyking.com/hobbyking/s...o%5FServo.html
controller:
http://www.hobbyking.com/hobbyking/s...idProduct=2165
and i have RX like this:
http://www.hobbyking.com/hobbyking/s...h%5F36Mhz.html
but i have 6 channels^^^
is it good setup for this plane ?
thanks for helping.
plane:
http://www.hobbyking.com/hobbyking/s...%5FARF%5F.html
motor:
http://www.hobbyking.com/hobbyking/s...idProduct=6410
prop:
http://www.hobbyking.com/hobbyking/s...idProduct=7167
lipoX2:
http://www.hobbyking.com/hobbyking/s...S1P%5F20C.html
servosX4:
http://www.hobbyking.com/hobbyking/s...o%5FServo.html
controller:
http://www.hobbyking.com/hobbyking/s...idProduct=2165
and i have RX like this:
http://www.hobbyking.com/hobbyking/s...h%5F36Mhz.html
but i have 6 channels^^^
is it good setup for this plane ?
thanks for helping.
Thread
Thread Starter
Forum
Replies
Last Post
tallflyer
Video Parking lot
8
11-14-2012 03:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
