Go Back  WattFlyer RC Electric Flight Forums - Discuss radio control eflight > Company Support Forums > FMA Direct
Reload this Page >

charging multiple mcpx batteries at once on Cellpro Gold 4S?

FMA Direct Discuss FMA Direct products or ask your support questions.

charging multiple mcpx batteries at once on Cellpro Gold 4S?

Old 10-29-2011, 05:31 PM
  #1  
matthewcornell
New Member
Thread Starter
 
Join Date: Oct 2011
Posts: 3
Default charging multiple mcpx batteries at once on Cellpro Gold 4S?

Hi Everyone. I've seen a number of threads on this, but I'm still confused and I'm hoping you can give me some advice. I want to charge multiple mCP x helicopter batteries (200mAh 1S 3.7V 25C LiPos) at the same time in my Cellpro 4s Gold Charger ( http://www.revolectrix.com/4sgold_description_tab.htm ), which I bought with the "CP-GP/KO" battery connector adapter ( http://www.revolectrix.com/cellpro_adapters.htm ). The Cellpro tech guy says the charger requires at least 350ma to perform a full charge, and that I'd have to parallel charge enough cells together to reach the 350ma. Isn't there a cable I can buy that would hook three or four together in parallel, with a connector that matches one of those on my CP-GP/KO? I found this one, but it doesn't give specs for its connectors or how it's wired: EA-057-B Charging Cable ( http://www.xtreme-production.com/xtr...mart&Itemid=31 ). To further muddy the water, the Cellpro tech says the cable to connect my cells in parallel would go to their CPBP7 pigtail, and would not connect through the GP/KO adapter. I don't understand why. Last two questions, a) how many could I charge at once (I've seen links to cables that connect six batteries), and b) what rate should I charge at (the Cellpro is automatic, I think). Any help would be great!
matthewcornell is offline  
Old 10-31-2011, 04:54 PM
  #2  
Howard Matos
Production Supervisor
 
Howard Matos's Avatar
 
Join Date: Sep 2008
Location: Frederick, MD
Posts: 77
Default

Originally Posted by matthewcornell View Post
Hi Everyone. I've seen a number of threads on this, but I'm still confused and I'm hoping you can give me some advice. I want to charge multiple mCP x helicopter batteries (200mAh 1S 3.7V 25C LiPos) at the same time in my Cellpro 4s Gold Charger ( http://www.revolectrix.com/4sgold_description_tab.htm ), which I bought with the "CP-GP/KO" battery connector adapter ( http://www.revolectrix.com/cellpro_adapters.htm ). The Cellpro tech guy says the charger requires at least 350ma to perform a full charge, and that I'd have to parallel charge enough cells together to reach the 350ma. Isn't there a cable I can buy that would hook three or four together in parallel, with a connector that matches one of those on my CP-GP/KO? I found this one, but it doesn't give specs for its connectors or how it's wired: EA-057-B Charging Cable ( http://www.xtreme-production.com/xtr...mart&Itemid=31 ). To further muddy the water, the Cellpro tech says the cable to connect my cells in parallel would go to their CPBP7 pigtail, and would not connect through the GP/KO adapter. I don't understand why. Last two questions, a) how many could I charge at once (I've seen links to cables that connect six batteries), and b) what rate should I charge at (the Cellpro is automatic, I think). Any help would be great!
Hi,

When you are talking about charging a single cell, for the 4S Gold, is the 2 outside wires, the red and black. The reason I suggested for you to use the CPBP7 pigtail is there is not a 1S spot on the adapter you purchased (CP-GP/KO). Also, I do not know the availability of a JST XH 1S parallel adapter and then, how would you connect it to the CP-GP/KO without making a modification to the connector because there is not a 1S position. The CPBP7 in my option is the easiest way to rig up a parallel adapter for charging a single cell.

There is no limit to the amount of cells you can parallel charge except that the charger has a maximum output and it would take longer to charge the more cells you add to charge.

You can use one of the auto charge rates or compute a manual charge rate. To do this, total the capacity of all cells you plan on charging. Then multiple by 1,2, or 3 for a 1C, 2C, or 3C charge rate. Example:
You have 3 of your 200 ma cells connected to charge.
3 x 200 ma = 600 ma total capacity
600 ma x 2C = 1200 ma or 1.2 amps.
This creates a 2C charge rate for 3 - 200 ma cells.

Let me know if you have any questions, thanks.
Howard Matos is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tim Marks
FMA Direct
63
09-21-2012 06:09 AM
Howard Matos
FMA Direct
7
10-25-2011 08:03 AM
Stevephoon
Batteries & Chargers
8
08-05-2011 11:59 PM
Howard Matos
FMA Direct
0
07-28-2011 03:04 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Quick Reply: charging multiple mcpx batteries at once on Cellpro Gold 4S?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.10345 seconds with 12 queries