Inrunner substitute motor for Typhoon 3D
07-20-2012, 03:35 PM
#1
New Member
Thread Starter
Join Date: Apr 2007
Posts: 18
Inrunner substitute motor for Typhoon 3D
Hi there,
Can anyone point me into good and cheap inrunner motor as a substitute for my Typhoon 3D? The original one seems to be expensive.
Also at this point I'm not ready to switch into outrunner one as still have quite few spare parts (gearbox, shafts, props, etc), so still may run for quite a long time once had a new inrunner motor mounted into this plane.
Many thanks!
Can anyone point me into good and cheap inrunner motor as a substitute for my Typhoon 3D? The original one seems to be expensive.
Also at this point I'm not ready to switch into outrunner one as still have quite few spare parts (gearbox, shafts, props, etc), so still may run for quite a long time once had a new inrunner motor mounted into this plane.
Many thanks!
08-18-2012, 06:10 PM
#3
Super Contributor
Join Date: Aug 2005
Posts: 1,726
What is the physical size of the original... is it approximately 65g, 20mm x 40mm?
http://www.hobbypartz.com/elite-400-...ess-motor.html
http://www.hobbypartz.com/elite-400-...ess-motor.html
Thread
Thread Starter
Forum
Replies
Last Post
tallflyer
Video Parking lot
8
11-14-2012 03:17 PM
aerofundan
3D Flying
2
09-22-2011 09:48 PM
z-8
3D Flying
227
03-13-2011 01:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
