Forsale Carbon Fiber Full Ball Bearing Control Horn System - WattFlyer RC Electric Flight Forums - Discuss radio control eflight

General RC items For Sale and WTB List tools, RC simulators and any other RC related item that is generally classified

For Sale Carbon Fiber Full Ball Bearing Control Horn System

Old 02-04-2015, 09:34 PM
  #1  
storm2313
Member
Thread Starter
 
Join Date: Aug 2011
Posts: 23
Default Carbon Fiber Full Ball Bearing Control Horn System

This is a full ball bearing carbon fiber control horn system minus only the 4-40 pushrods.

I encourage you to read the listing to the end to digest how complete this system is compared to other aircraft designs on the market. This system features a ball bearing 4-40 clevis which is made with reinforced nylon that connects to your servo. This is included as standard. On the other end of the system features a 4-40 ball bearing reinforced nylon clevis which threads to the 4-40 carbon steel Phillips screws. The two included screws are 3/4in. and 1in to cover virtually any control surface thickness. Two screw sizes also allows for simple control throw deflection adjustment. If you require more control surface throw the smaller screw is best, and for less throw the 1in is the one to use.

This is the first carbon horn to feature a threaded control surface trim adjustment!

This system then features two individual CNC machined 100% carbon fiber 2x2 twill matte finished plates that are .5mm in thickness that sandwich your control surface. The carbon when combined with the control surfaces thickness adds an additional 1mm of total carbon reinforcement. This is usually all that's required for most models, however to allow for custom strength requirements you can add additional .5mm carbon plates for virtually unlimited strength (For example to make each of them 1mm in thickness you would need to purchase two additional plates. this would in turn add an additional 2mm of carbon reinforcement to the control surface its mounted to!). Simply align them, and glue them together for virtually unlimited strength possibilities!

This is also the first carbon fiber control horn that allows the modeler to increase strength for their specific aircraft.

This set was engineered with safety, and precision in mind. The ball bearing system offers a control system you can setup in your model, with peace of mind. It features zero play from the first flight, and years from the first flight. The pushrod clevises are screwed threw to attach to the ball bearing control surface clevis.

This means when assembling these in your model with Loctite (Loctite is mandatory when dealing with aircraft vibration. Please be safe, and use it with this system) on the nut virtually assures no pushrod control failures.

Mounting these to your model is as simple as drilling a 3/32 hole (using a slightly smaller hole, so the screw threads into your control surface), removing the covering from the area, applying a little epoxy to each plate, inserting the screw, and tightening the nut.

*The toothpicks are used as an option when softer woods are used for control surfaces. Simply drill, a hole inset the toothpicks in each of them, and CA them in place. Then sand them level with the control surface, and epoxy the carbon plates over them, so that when you install the nut, and compress the two plates together the wood doesn't indent!!*

$13.50 shipped per control horn system, or $35 for 3 shipped.

To check my feedback, here's my Ebay store http://www.ebay.com/itm/Carbon-Fiber...e=STRK:MESE:IT

If you would like to purchase additional carbon fiber plates they are $1.75 a piece please message me on your required quantity.
Attached Thumbnails Click image for larger version

Name:	DSCN0927.JPG
Views:	114
Size:	3.25 MB
ID:	179493   Click image for larger version

Name:	DSCN0930.JPG
Views:	114
Size:	2.54 MB
ID:	179494   Click image for larger version

Name:	DSCN0926.JPG
Views:	105
Size:	1.75 MB
ID:	179495   Click image for larger version

Name:	DSCN0928.JPG
Views:	99
Size:	3.76 MB
ID:	179496  
storm2313 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AEAJR
Beginners
289
01-04-2019 08:37 PM
AEAJR
Beginners
165
06-28-2017 04:22 PM
ActionDrone
New Product Announcements
5
11-01-2013 03:09 AM
Doc Austin
3D Flying
5
01-05-2013 03:19 AM
AEAJR
Hi-Performance and Sailplanes
3
04-09-2012 12:57 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Quick Reply: For Sale Carbon Fiber Full Ball Bearing Control Horn System


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.07733 seconds with 18 queries