Dons 4000kv plus motor with 64mm EDO type 11 fan help
08-04-2013, 06:29 PM
#1
Member
Thread Starter
Join Date: Mar 2008
Location: UK Devon
Posts: 58
Dons 4000kv plus motor with 64mm EDO type 11 fan help
Im looking for a bit of advice. I have Dons 4000kv+ motor with type 11 edo fan. I have used this set up in my hk stinger and really like it. Problem is,i have blown the fan unit up with a bit of twig that got sucked in. I have had just the spare rotors from Don before but was wondering if there is a fan unit,that would work with this motor,that i could get in the uk?
As i said,i could get them from Don again but the postage is so high to the UK and was hoping to source one over in the UK. Any ideas?
As i said,i could get them from Don again but the postage is so high to the UK and was hoping to source one over in the UK. Any ideas?
Last edited by heliflyer; 08-04-2013 at 06:30 PM. Reason: mistake
08-04-2013, 07:06 PM
#2
Super Contributor
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,273
Originally Posted by heliflyer
Im looking for a bit of advice. I have Dons 4000kv+ motor with type 11 edo fan. I have used this set up in my hk stinger and really like it. Problem is,i have blown the fan unit up with a bit of twig that got sucked in. I have had just the spare rotors from Don before but was wondering if there is a fan unit,that would work with this motor,that i could get in the uk?
As i said,i could get them from Don again but the postage is so high to the UK and was hoping to source one over in the UK. Any ideas?
As i said,i could get them from Don again but the postage is so high to the UK and was hoping to source one over in the UK. Any ideas?
http://www.giantshark.co.uk/bladed-d...-p-407834.html
http://www.giantshark.co.uk/bladed-d...-p-402724.html
08-04-2013, 11:11 PM
#4
Super Contributor
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,273
Originally Posted by heliflyer
Thanks for that chellie, All i need to know know is what size shaft is fitted to my Dons motor.I purchased it,as a combo,fully balanced.
http://donsrc.com/cart/index.php?_a=category&cat_id=13
http://donsrc.com/cart/index.php?_a=...&product_id=62
http://donsrc.com/cart/index.php?_a=...&product_id=92
08-04-2013, 11:19 PM
#5
Super Contributor
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,273
It Looks like Don custom makes these EDF units, and you will need to know if you have the EDO type 1 or 2 , it looks like the EDO 1 unit is better than the EDO 2 , it looks like you might have to buy it from Don, as he makes custom adapters for his EDFs. Best bit is to give Don a E mail to find out for sure.
