For Sale Losi Ten MT Brushless monster truck
#1
Member
Thread Starter
Join Date: Aug 2017
Posts: 24

Upgraded Steering Servo team associated $120, Only ten more oz/in but digital and twice as fast ,Avc loves it unlike the analog servo that comes with. In the instruction manual spektrum calls out not to use analog servo with avc???ok losi ��
the analog s605 included
Comes truely Ready to run NOW. Another issue with losi .RTR without battery or charger?
Duratrax intelligent peak lipo charger. Handles up to 4S. I have included a 2S Mah lipo and a 3S 4000 MaH 40c which runs the trucks esc to the max at 130amps.
Extra spur and pinion, different gearing then installed. 2 Connectors (1 for the 3s to ESC and a ec3 to charger connector)
The BAD:
Tires are about 50% give or take a bit less tread in ballooning areas, under carriage is scratched (truck bottoms out unavoidable) body is scratched,
the esc does not calibrate with the dx2e throttle trim at neutral not sure if this is a remote or esc issue but if you turn down the throttle trim to about half way between full negitive and neutral then it calibrates and works normal not really worth mentioning but i have hand writen instructions about this in the manual as a reminder.
Super fast and straight lines with AVC. Turns insanely fast super fun
the analog s605 included
Comes truely Ready to run NOW. Another issue with losi .RTR without battery or charger?
Duratrax intelligent peak lipo charger. Handles up to 4S. I have included a 2S Mah lipo and a 3S 4000 MaH 40c which runs the trucks esc to the max at 130amps.
Extra spur and pinion, different gearing then installed. 2 Connectors (1 for the 3s to ESC and a ec3 to charger connector)
The BAD:
Tires are about 50% give or take a bit less tread in ballooning areas, under carriage is scratched (truck bottoms out unavoidable) body is scratched,
the esc does not calibrate with the dx2e throttle trim at neutral not sure if this is a remote or esc issue but if you turn down the throttle trim to about half way between full negitive and neutral then it calibrates and works normal not really worth mentioning but i have hand writen instructions about this in the manual as a reminder.
Super fast and straight lines with AVC. Turns insanely fast super fun