RC Radios, Transmitters, Receivers, Servos, gyros Discussion all about rc radios, transmitters, receivers, servos, etc.

HK RX3S Receiver/Gyro on off problem with DX7

Old 11-10-2013, 08:41 PM
  #1  
stemo99
Member
Thread Starter
 
Join Date: Sep 2010
Location: So. Jersey
Posts: 43
Default HK RX3S Receiver/Gyro on off problem with DX7

I have a HK RX3S version 3 receiver/gyro that can be turned on and off via the radio. I have an older DX7 radio and have all gyro and contol surfaces working properly except controling the on off function of the gyro. The gyro on off is controled by an Aux1 switch. The DX7 doesn't have an Aux1 switch but has an Aux2 switch and that won't turn the gyro on or off. HAS anyone with a DX7 figured out how to accomplish on off? Thanks in advance.
stemo99 is offline  
Old 11-10-2013, 10:19 PM
  #2  
hillbille
Super Contributor
 
hillbille's Avatar
 
Join Date: May 2007
Location: Barstow, California
Posts: 1,054
Default

Change the throws - AUX2 DOES control the AUX on the receiver, but it is a 3 position switch, so you need to make ONE of the positions read 0% and either of the others to read 150%. The 0% should be where the switch will be when you want the GYRO off, AND should NOT be set when the battery is first plugged in and the gyro is initializing.

Hillbille
hillbille is offline  
Old 11-10-2013, 10:51 PM
  #3  
Turner
Super Contributor
 
Turner's Avatar
 
Join Date: Sep 2009
Location: Tallahassee, FL
Posts: 1,533
Default

On the old DX7 AUX1 is synonymous with FLAP so AUX1 is controlled by the three position flap switch and the flap rocker or not as determined by choices made in the Input Select screen.
Turner is offline  
Old 11-11-2013, 12:27 AM
  #4  
stemo99
Member
Thread Starter
 
Join Date: Sep 2010
Location: So. Jersey
Posts: 43
Default

Thanks Turner and Hillbillie, it works!!!!! I now have it set up as follows in the flap system screen: The 3 position flap switch controls the gyro.

NORM. UP 100%
MID. DOWN 100%
LAND. Not used
AUX Control Switch on gyro moved up towards the center of th gyro.

The 3 position flap switch s/b as follows:
F1 is ON and should be used when plugging in battery to initialize gyro
F0 is gyro OFF
F2 is not used
stemo99 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
frenchstan
Pusher Park Jets
0
01-30-2012 04:11 AM
emjdrvr
Power Systems
1
10-25-2011 05:44 PM
AirmanAirhead
RC Radios, Transmitters, Receivers, Servos, gyros
3
06-19-2011 08:31 PM
Gee
Power Systems
20
04-14-2011 03:29 AM
mclarkson
RC Radios, Transmitters, Receivers, Servos, gyros
13
02-13-2011 12:45 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Quick Reply: HK RX3S Receiver/Gyro on off problem with DX7


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.13527 seconds with 15 queries