Beginners New to e-power flying? Get the low down in here from experienced e-power RC pilots!

Feld Box

Old 07-21-2011, 08:47 PM
  #1  
Fishbonez
Love my Stinger
Thread Starter
 
Fishbonez's Avatar
 
Join Date: Apr 2011
Location: Wyoming
Posts: 2,951
Default Field Box

Hello folks,
I was just curiouse of something. I have been using an old Craftsman Tool Bag as my "Field Box" since I started out in April no one gave me the idea I just kinda figured I got tired of going back to the house for minor repairs and figured out it was pretty much standard for every RCer to have one or maybe just common sense one of the two. Any how My bag is getting kinda full and I was looking into something like Tackle Box of sorts when my wife said what are you going to put in it my reply was I dunna know so brings me tomy question what do you carry in your field box. Sure we all kn ow tape screwdrivers maybe some spare parts or batteries but is there something in your field box that you would recommend someone have with them at all times that say maybe no one ever told you to bring? Again just curiuse thing.

I know in my bag are lipos ,tape and screwdrivers but if I were to claim soomething I would highly recomn would be Exacto knives kit. You would not be surprised howoften I have pulled it out for some reason or other
Fisbonez

Last edited by Fishbonez; 12-20-2015 at 03:48 PM. Reason: I tried to correct the title but you know how that goes
Fishbonez is offline  
Old 07-21-2011, 10:39 PM
  #2  
xmech2k
Ya got any Beeman's?
 
xmech2k's Avatar
 
Join Date: Apr 2009
Location: San Diego, CA
Posts: 3,100
Default

A bind plug, for when you forget that to do a range check on a SPectrum, you pull and hold the trainer switch after you turn on the radio...
xmech2k is offline  
Old 07-22-2011, 12:07 AM
  #3  
Old Fart
Lost at LAX
 
Old Fart's Avatar
 
Join Date: Jan 2006
Posts: 2,171
Default

I use something similar to this: http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

As far as "electric" tools and support (the box also has support gear for gas, nitro and sailplanes), I have

Small "multi" screwdriver
needle nose pliers
regular pliers
blenderm tape
5 minute epoxy (dixie cups, coffee stir sticks)
CA (thin and medium)
t pins
rubber bands
e-props
prop adaptors
allen wrenches (metric/us)
Locktite
bind plug (plus more in the TX case)
IR thermometer
velcro (both sides)

Dedicated bins for any hardware that comes on/off a model when it's assembled
Some spare hardware for the above
Old Fart is offline  
Old 07-22-2011, 04:35 AM
  #4  
dumo01
dumo01
 
dumo01's Avatar
 
Join Date: Mar 2009
Location: Columbus, Ohio
Posts: 775
Default

Great list from Jeff

I also carry one of the little battery check voltmeters as well as voltmeter that will put a load on the battery for a couple of my bigger planes that have separate receiver batteries
dumo01 is offline  
Old 07-22-2011, 05:27 AM
  #5  
Fishbonez
Love my Stinger
Thread Starter
 
Fishbonez's Avatar
 
Join Date: Apr 2011
Location: Wyoming
Posts: 2,951
Default

I agree that is a great list.
In fact there are a few items in that list I shall add.
I also carry fishing line. So I can attach my minicam in case of big crash and it falls off its velcro. Also I have a magnetic tray for screws after being removed
Fishbonez is offline  
Old 07-22-2011, 05:43 AM
  #6  
earthsciteach
Member
 
Join Date: Apr 2011
Location: Dallastown, PA
Posts: 958
Default

Good thread. Since I do most of my flying out of my backyard, I haven't had to come up with a field box. But tomorrow we leave for 10 days at the beach. I've packed up my Super Cub and a bunch of my go to tools and accessories. I had to sort through all the stuff I've accumulated in the last few months. I really should come up with something more formal. This thread will help me a lot!
earthsciteach is offline  
Old 07-22-2011, 06:04 AM
  #7  
Wrongway-Feldman
Member
 
Wrongway-Feldman's Avatar
 
Join Date: Jan 2011
Location: Govan, Saskatchewan
Posts: 936
Default

And don't forget the rubber bands. I put em on every battery that comes out of a plane so I don't accidentally put a spent battery back in. Nothing like putting what you think is a fresh battery in your plane only to hit lvc one minute in to the flight.
Wrongway-Feldman is offline  
Old 07-22-2011, 06:08 AM
  #8  
Fishbonez
Love my Stinger
Thread Starter
 
Fishbonez's Avatar
 
Join Date: Apr 2011
Location: Wyoming
Posts: 2,951
Default

Originally Posted by Wrongway-Feldman View Post
And don't forget the rubber bands. I put em on every battery that comes out of a plane so I don't accidentally put a spent battery back in. Nothing like putting what you think is a fresh battery in your plane only to hit lvc one minute in to the flight.
That is a great idea I inf act left once thinking I had top off my batteries and really had not. Big crash. I corrected the matter but rubber bands would be a smart way not to confuse them by mistake. I need to add that.

Also this may sound corney but a checklist I found was important so I would not forget to check something before and after flying
Fishbonez is offline  
Old 07-22-2011, 02:34 PM
  #9  
Wrongway-Feldman
Member
 
Wrongway-Feldman's Avatar
 
Join Date: Jan 2011
Location: Govan, Saskatchewan
Posts: 936
Default

Originally Posted by Fishbonez View Post
That is a great idea I inf act left once thinking I had top off my batteries and really had not. Big crash. I corrected the matter but rubber bands would be a smart way not to confuse them by mistake. I need to add that.

Also this may sound corney but a checklist I found was important so I would not forget to check something before and after flying
I used to use tape to hold the leads to the battery but after a while you end up getting sticky batteries. I switched to rubber bands cause its cleaner.
A check list sound like a good idea. Haven't forgotten anything yet but I'm not getting younger. My check list at the moment consists of; plane, batteries, tool box, transmitter.
I also keep a dx5e in the car at all times just in case I do forget to bring my regular transmitter. That way I can still bind to the dx5e without having to drive all the way home. Just planning ahead. Lol.
Wrongway-Feldman is offline  
Old 07-23-2011, 07:29 AM
  #10  
Old Fart
Lost at LAX
 
Old Fart's Avatar
 
Join Date: Jan 2006
Posts: 2,171
Default

All of my lipos are in a briefcase - empty compartment for the "used and abused" ones.

I also carry a battery tester/load meter. Not for electrics though, none of my e-planes have a dedicated RX battery
Old Fart is offline  
Old 07-23-2011, 07:53 AM
  #11  
[email protected]!
Member
 
M@!'s Avatar
 
Join Date: May 2011
Posts: 136
Default

Great thread, like the rubber band idea. It was a day late for me though. I took a spent battery out with me today. Glad my foamie glinds well!
M@! is offline  
Old 07-23-2011, 02:58 PM
  #12  
Fishbonez
Love my Stinger
Thread Starter
 
Fishbonez's Avatar
 
Join Date: Apr 2011
Location: Wyoming
Posts: 2,951
Default

As silly as it sounds I bring a First Aide Kit. For me it has been a life savor. no pun intended, As often as I have had to go tromping through the fields to recover my plane and I think I have found every hole in Wyoming, you would think I got my butt whooped a couple of times.
Fishbonez is offline  
Old 07-25-2011, 06:57 PM
  #13  
touche
Member
 
Join Date: Sep 2010
Location: Winnipeg,Canada
Posts: 140
Default

I got my plastic fishing boxes at Wal Mart. Very cheap and many sizes. I keep all my battery chargers (Hyperion/Hobbico DC) and cables and connectors in a separate box and all my other parts and tools,tape,glue,velcro etc in another. You can get tiny boxes for blades and screws and keep them in a bigger box.
I spend 6 months in a 5th wheel and only have so much room for "MY" hobby so the boxes work well. Stackable and easy to switch to the truck to take with me. I also have a small carry on duffle bag and you can easily put all the tackle boxes in it and just carry one small lightweight bag. Lipos carried separately.
touche is offline  
Old 07-28-2011, 01:25 AM
  #14  
Fishbonez
Love my Stinger
Thread Starter
 
Fishbonez's Avatar
 
Join Date: Apr 2011
Location: Wyoming
Posts: 2,951
Default

I picked up a Stanley Tool Box on sale $9.99 at WalMart. So far it works good has compartments on top for Lipos and small things and a nice little tray for other items. I think I need to add CA glue to my list because toay I was asked 3 times for it and they did nt want Gorilla.
Fishbonez is offline  
Old 07-28-2011, 01:32 AM
  #15  
kyleservicetech
Super Contributor
 
kyleservicetech's Avatar
 
Join Date: Apr 2008
Location: Wisconsin, USA
Posts: 8,952
Default

Originally Posted by Fishbonez View Post
Hello folks,
I was just curiouse of something. I have been using an old Craftsman Tool Bag as my "Field Box" since I started out in April no one gave me the idea I just kinda figured I got tired of going back to the house for minor repairs and figured out it was pretty much standard for every RCer to have one or maybe just common sense one of the two. Any how My bag is getting kinda full and I was looking into something like Tackle Box of sorts when my wife said what are you going to put in it my reply was I dunna know so brings me tomy question what do you carry in your field box. Sure we all kn ow tape screwdrivers maybe some spare parts or batteries but is there something in your field box that you would recommend someone have with them at all times that say maybe no one ever told you to bring? Again just curiuse thing.

I know in my bag are lipos ,tape and screwdrivers but if I were to claim soomething I would highly recomn would be Exacto knives kit. You would not be surprised howoften I have pulled it out for some reason or other
Fisbonez
Here is what I use, an aluminum case from Harbor Freight.
http://www.harborfreight.com/18-inch...ase-39196.html

It's got room for screwdrivers, wrenches, pliars, you name it. Plus space for spare props behind the top lid. And, the main compartments can be partitioned for your transmitter, and various other items.
kyleservicetech is offline  
Old 07-28-2011, 01:41 AM
  #16  
Fishbonez
Love my Stinger
Thread Starter
 
Fishbonez's Avatar
 
Join Date: Apr 2011
Location: Wyoming
Posts: 2,951
Default

Originally Posted by kyleservicetech View Post
Here is what I use, an aluminum case from Harbor Freight.
http://www.harborfreight.com/18-inch...ase-39196.html

It's got room for screwdrivers, wrenches, pliars, you name it. Plus space for spare props behind the top lid. And, the main compartments can be partitioned for your transmitter, and various other items.
Wow that is nice and a good price as well. Looks very durable
Fishbonez is offline  
Old 07-28-2011, 01:57 AM
  #17  
kyleservicetech
Super Contributor
 
kyleservicetech's Avatar
 
Join Date: Apr 2008
Location: Wisconsin, USA
Posts: 8,952
Default

Originally Posted by Fishbonez View Post
Wow that is nice and a good price as well. Looks very durable
I've had mine for some 5 years. That aluminum case has a plywood inner box for support, and the interior is lined with some sort of fabric. It is very strong.
Attached Thumbnails Click image for larger version

Name:	Harbor Freight Model Case.jpg
Views:	150
Size:	99.5 KB
ID:	151274  
kyleservicetech is offline  
Old 07-28-2011, 02:36 AM
  #18  
[email protected]!
Member
 
M@!'s Avatar
 
Join Date: May 2011
Posts: 136
Default

Here is my field box, total of 4 compartments. Plenty of room for Lipo's, a few screwdrivers and extra props.
Attached Thumbnails Click image for larger version

Name:	shorts.jpg
Views:	91
Size:	44.4 KB
ID:	151275  
M@! is offline  
Old 07-28-2011, 02:43 AM
  #19  
Fishbonez
Love my Stinger
Thread Starter
 
Fishbonez's Avatar
 
Join Date: Apr 2011
Location: Wyoming
Posts: 2,951
Default

Originally Posted by [email protected]! View Post
Here is my field box, total of 4 compartments. Plenty of room for Lipo's, a few screwdrivers and extra props.
LOL Thats Great
Fishbonez is offline  
Old 07-28-2011, 03:06 AM
  #20  
Wrongway-Feldman
Member
 
Wrongway-Feldman's Avatar
 
Join Date: Jan 2011
Location: Govan, Saskatchewan
Posts: 936
Default

Originally Posted by kyleservicetech View Post
I've had mine for some 5 years. That aluminum case has a plywood inner box for support, and the interior is lined with some sort of fabric. It is very strong.
That looks perfect. I'm gonna have to get one of those. Great price too.
Wrongway-Feldman is offline  
Old 07-28-2011, 03:39 AM
  #21  
FlyingMonkey
Flite Test Fan
 
FlyingMonkey's Avatar
 
Join Date: Apr 2007
Location: 32459
Posts: 8,930
Default

I'm looking at something like this...

http://www.walmart.com/ip/Flambeau-K...i_sku=17097553

or

http://www.walmart.com/ip/Plano-Angl...i_sku=15904153

The pull out boxes make great battery holders. You can adjust the sizes of the compartments, making the containers very versatile. A flying friend showed me how he flips the batteries upside down when they've been used.
FlyingMonkey is offline  
Old 09-11-2011, 07:07 AM
  #22  
Fishbonez
Love my Stinger
Thread Starter
 
Fishbonez's Avatar
 
Join Date: Apr 2011
Location: Wyoming
Posts: 2,951
Default

I have decided that Hinge Tape is a good thing to have in one field box
Fishbonez is offline  
Old 09-13-2011, 08:31 AM
  #23  
solentlife
Super Contributor
 
solentlife's Avatar
 
Join Date: Oct 2010
Location: Ex UK Brit now in Latvia west coast - Ventspils
Posts: 12,555
Default

I have 4 tray boxes ...

a) Is fixed wing stuff ...
slot and cross head screwdrivers.
Hex drivers.
needle nose pliers
CA glue
Spare props
Spare prop bushes
assorted small screws
insulating tape
toothpicks
adjustable small wrench
crimp on connectors
fishing weigh-scale

b) Is for heli's
Assorted hex drivers
Assorted small pliers
Ball joint pliers
spare main and tail blades
spare ball-joints and screws
flybar paddles
shafts
main gear wheel
pitch gauge
loctite
CA glue
spare servos
spare link arms

c) is a continuation of b) with lots more spare parts ...

d) is my LiPo / Charger box.

2 x 1000mAh 3S
3 x 2280mAh 3S
2 x 2100mAh 3S
2 x 1800mAh 3S

1 x 650mAh 9.6v NiMH

8 x 2300mAh AA NiMH spare Tx batts

1 x 250mAh 4.8v NiMH

Wattmeter

2 x slow LiPo chargers

1 x B6 Lipo Charger

12v leads for chargers.

ESC programming card

Charger leads for various


Why so much ? The boxes also provide dedicated storage in my model den for spares ... tools ... etc.
They are divided up into various size compartments. I cut out odd dividing walls to allow main rotors to fit etc.

I have all at hand whether at field or in model den.

It's amazing what I get asked for when out there ........ I usually have it ... so not only do I stay flying - but also other guys who know I have gear.

I have thought about changing to a fishing tackle box ... but then I lose the segregated boxes per model type.
solentlife is offline  
Old 09-17-2011, 06:49 AM
  #24  
Trickbrick
New Member
 
Join Date: Aug 2010
Location: Bryan, Texas
Posts: 3
Default

A few more ideas for extended sessions:
-Rags, paper towels, or napkins.
-baby wipes (soapy cloth for models or hands)
-Mini zipties
- 1/2 to 3" wide clear tape (temporary damage repair)
-Butane-style soldering gun
-electrical tape or silicon caulk (insulate soldered joint)
-RPM meter
-sliding square
-magnetic prop balancer (disassembles into its own case)
-3' keychain measuring tape (sold at Walmarts automotive desk)
-Automotive or kitchen-size fire extinguisher
-Clothespins for repair "clamps"
Trickbrick is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FlyWheel
General Electric Discussions
0
07-02-2011 04:28 PM
rckowal
General RC items For Sale and WTB
1
04-29-2011 02:14 AM
fieldofdreamsflyer
Airplanes - Electric For Sale & WTB
0
03-05-2011 08:50 PM
TM4197
Hi-Performance and Sailplanes
19
02-23-2011 02:24 PM
FKamper
General Electric Discussions
1
01-17-2011 04:12 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Quick Reply: Feld Box


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.21812 seconds with 16 queries