Art Tech Corsair not working
11-07-2018, 02:18 AM
#1
New Member
Thread Starter
Join Date: Nov 2018
Posts: 2
Art Tech Corsair not working
I have an Art Tech RTF Corsair that will not work. I have yet to fly it and it has been sitting in a box the last three years.
When all is connected all it does is beep and the rudder twitches. I looked online and found some binding procedures to do with the receiver. The problem is they tell you to push in a small button on the receiver. I do not have that button present.
Any help
When all is connected all it does is beep and the rudder twitches. I looked online and found some binding procedures to do with the receiver. The problem is they tell you to push in a small button on the receiver. I do not have that button present.
Any help
11-07-2018, 05:31 AM
#2
Administrator
Join Date: Sep 2005
Location: Middle Tennessee
Posts: 15,745
A flying buddy has one and his had two issues. There was a servo Y harness which was defective and he couldn't get the speed control to arm. Once he changed out the Y harness and speed control the plane flew well.
11-07-2018, 04:34 PM
#4
Past President of PSSF
Join Date: Sep 2009
Location: Lacey WA, 1 mile E of Mushroom Corner
Posts: 2,265
Sometimes those buttons are smaller than you would ever expect.
The button may be a black spot less than 1/16" in size. I have had a hard time finding them in the past.
The button may be a black spot less than 1/16" in size. I have had a hard time finding them in the past.
